Return to search

Inorganic-organic hybrid materials and abrasion resistant coatings based on a sol-gel approach

Novel inorganic-organic hybrid materials made previously in the laboratory have
utilized acids catalysts such as HCI, acetic acid, toluene sulfonic acid and polystyrene sulfonic acid to catalyze the sol-gel reaction. The sol-gel reaction can also be catalyzed under near neutral (i.e. 5 < pH < 7) and basic conditions. The effects of synthesizing hybrid materials under near basic and basic conditions has not been studied.

Attempts to synthesize hybrid materials from polytetramethylene oxide (PTMO) end functionalized with triethoxy silyl groups and, tetraethylorthosilicate (TEOS) under basic conditions met with only partial success. The films obtained had low mechanical stability. This was attributed to the low reactivity of the triethoxy species under neutral and basic conditions. In contrast, films with good mechanical stability were obtained when the TEOS was replaced with titanium tetraisopropoxide (TIOPR). The microstructure of the TIOPRlPTMO hybrid synthesized under near neutral conditions was generally similar to the acid catalyzed PTMOffIOPR hybrids. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/40188
Date26 October 2005
CreatorsBetrabet, Chinmay Suresh
ContributorsMaterials Engineering Science, Wilkes, Garth L., Davis, Richey M., Desu, Seshu B., Riffle, Judy S., Ward, Thomas C.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeDissertation, Text
Formatxiv, 233 leaves, BTD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 29323385, LD5655.V856_1993.B477.pdf

Page generated in 0.002 seconds