This study develops an innovative configuration of seismic natural rubber dampers for multistory low- and medium-rise steel braced frames. The dampers are directly integrated in an horizontal position in the seismic force resisting system of the structure. They are connected in a series with typical chevron brace systems.This control system provides not only additional structural damping to the structure but also a period shift, acting in the same way as a base isolation system. First, the fiber reinforced natural rubber used in the application was tested. It exhibited strong non linear dependance of its equivalent viscoelastic properties related to the shear strain. Then, a 1/3-scale 3-story chevron braced steel frame with and without dampers was considered. The structure was build and placed on the shaking table of the University of Sherbrooke Structures Laboratory. Numerical studies show that the efficiency of the control system reduces strongly the seismic induced forces of the undamped structure without any amplification of displacement or drift. Obtained seismic response reduction levels represent significant safety and economical benefits for the proposed application. Finally, the control system viability is experimentally demonstrated by shaking table tests at different reduced seismic intensities. Non linear behavior of the structure due to non linear behavior of the damping material is highlighted, and the dependance of seismic control performances is shown to be related to seismic intensities. Results allow an extrapolation of the experimental control peformances tending to the numerical results at higher intensities.
| Identifer | oai:union.ndltd.org:usherbrooke.ca/oai:savoirs.usherbrooke.ca:11143/1544 |
| Date | January 2010 |
| Creators | Gauron, Olivier |
| Contributors | Paultre, Patrick |
| Publisher | Université de Sherbrooke |
| Source Sets | Université de Sherbrooke |
| Language | French |
| Detected Language | English |
| Type | Mémoire |
| Rights | © Olivier Gauron |
Page generated in 0.0041 seconds