Return to search

Design and Fabrication of High-Speed 25Gb/s Directly Modulated DFB Semiconductor Laser Diode

With a rapid increase in information capacity of Internet access, high-speed, highly-efficiency, and cost-effectiveness laser source for optical fiber communication is required. High-speed 25Gb/s directly modulated laser is essential of this communication range, because of its simple structure, direct-modulation characteristics, low cost, and integration capability for wavelength division multiplexing (WDM) system, and moreover, it can achieved 100Gb/s data transmission by four channel module system.
In this work, data modulation speed of 25Gb/s direct modulation DFB laser has been achieved. By employing high-speed coplanar waveguide structure with semi-insulating substrate, high-speed with f3dB > 20GHz has been demonstrated. By the electrical reflection measurement, it confirmed that the high-speed direction modulation can be realized through reduction of electrical parasitics.
The laser chips is measured under continuous-wave mode at room temperature. In 1300nm and 1550nm wavelength device, slope efficiency obtained by taper fiber coupled of 0.045 and 0.07mW/mA respectively, output power up to 2.73 and 3.96mW/facet at 60mA. The Side Mode Suppression Ratio was greater than 35dB. 3dB bandwidth of greater than 16GHz and 20.5GHz, relaxation oscillation frequency of 12GHz and 16.6GHz. Finally, clearly back-to-back 25Gb/s eye diagram and error-floor-free performance were obtained.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0815112-092459
Date15 August 2012
CreatorsWu, Yu-lun
ContributorsWei-Hung Su, Chao-kuei Lee, Ann-kuo Chu, Yi-jen Chiu
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0815112-092459
Rightsuser_define, Copyright information available at source archive

Page generated in 0.002 seconds