The heat generated in a circuit breaker can be transmitted in two ways: Either through metal parts of current path to conductors outside of device or through plastic parts or air of chassis. The accuracy of the simulation depends on the accuracy of the 3D model and all his parts and it also depends on precise definition of materials with precise definition of electrical and thermal parameters. Electrical circuit breaker has various source of the heat which results in raising temperature of the device above the level of environment. Heat sources are: 1) Joule’s loss of the circuit breaker current path. 2) Heat loss in a bimetal, which is used for thermal release. 3) Resistivity of contacts. This thesis deals with static state of thermal analysis so the sources do not include transient heat source for switching OFF and switching ON. Electrical circuit breakers are made in smaller and smaller forms however their electrical parameters are not decreasing with size. There is logical conclusion that there is more heat on the same unit size which makes thermal analysis of circuit breaker one of the most important part of development.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:221176 |
| Date | January 2015 |
| Creators | Mejzlík, Tomáš |
| Contributors | Valenta, Jiří, Dostál, Lukáš |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds