Master of Science / Department of Grain Science and Industry / Xiuzhi Susan Sun / Soybean oil-based resin for transparent flexible coating applications were formulated by dihydroxyl soybean oil (DSO) with commercial epoxy monomers (i.e., epoxidized soybean oil (ESO) and 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexanecarboxylate (ECHM)). The resin was formed to thermoset polymers using cationic ring-opening photopolymerization. The ether crosslinking and post-polymerization of the polymeric network were observed using Fourier transform infrared spectroscopy. Thermal properties of the bio-based coating materials and their copolymerization behaviors were examined using a differential scanning calorimetry and a thermogravimetric analyzer. Crosslink density and molecular weight between crosslink were obtained from dynamic mechanical analysis. ECHM/DSO (1: 1.43 weight ratio) films showed the highest elongation at break (49.2 %) with a tensile strength of 13.7 MPa. After 2 months storage, the elongation at break and tensile strength of films were 32 % and 15.1 MPa, respectively. ESO/DSO films (w/w ratios of 1:0.1, 1:0.15, and 1:0.2) exhibited stable flexibility around 11-13 % of elongations at break without significant reductions of tensile strengths (2.5 to 4.4 MPa) during 2-months shelf life. Optical transparencies of the films were comparable to commercial glass and polymers, and water uptake properties (0.72 and 2.83%) were significantly low.
| Identifer | oai:union.ndltd.org:KSU/oai:krex.k-state.edu:2097/18690 |
| Date | January 1900 |
| Creators | Sung, Jonggeun |
| Publisher | Kansas State University |
| Source Sets | K-State Research Exchange |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds