In recent years Hardware-in-the-Loop HiL, has gained more and more popularity within the vehicle industry. This is a more cost effective research alternative, as opposed to the tests done the traditional way, since in HiL testing the idea is to test the hardware of interest, such as an electronic control unit, in a simulated (or partially simulated) environment which closely resembles the real-world environment. This thesis is ordered by Daimler Chrysler AG and the objective of this thesis is the developing of a cylinder-by-cylinder model for the purpose of emulation of misfire in a four-stroke SI-engine. This purpose does not demand a precise modelling of the cylinder pressure but rather an adequate modelling of position and amplitude of the torque produced by each cylinder. The model should be preferebly computaionally tractable so it can be run on-line. Therefore, simplifications are made such as assuming the rule of a homogenous mixture, pressure and temperature inside the cylinder at all steps, so the pressure model can be analytical and able to cope with the real-time demand of the HiL. The model is implemented in Simulink and simulated with different sample rates and an improvement is to be seen as the sample rate is decreased.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-5396 |
| Date | January 2005 |
| Creators | Hashemzadeh Nayeri, Mohit |
| Publisher | Linköpings universitet, Institutionen för systemteknik, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0025 seconds