The thesis aimed to identify fracture strain for multiaxial loading for laminate material of Al and LDPE that is mostly used in the food packing technology specially in liquid packaging industry. These materials are thin and flexible which make it difficult to handle and test it. The investigation was through applying new Nakajima test setup on such a material by designing a custom setup and 3D printing the Nakajima setup prototype to be able to use it in this study. DIC technique was used to get the results from the Nakajima test and the software used to apply the DIC technique is GOM correlate. As a validation for measurement from such a technique, a tensile test has been done and measured strains were compared with those from the specimen from the Nakajima that has smallest width as it was close to a uniaxial loading. One more validation technique was by creating a FE-model using (Abaqus software) for the biaxial loading and comparing it to the biaxial loading results that obtained from the DIC analysis.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:bth-19007 |
| Date | January 2019 |
| Creators | shahen, mohamed |
| Publisher | Blekinge Tekniska Högskola, Institutionen för maskinteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds