A channel board was designed for a DRFM circuit. The DRFM is implemented in a Virtex-4 FPGA from Xilinx. In the future a similar channel board is intended to be used for target echo generation in ELSI which is an electronic warfare simulator at Saab Bofors Dynamics in Linköping. Besides the DRFM circuit the channel board consists of analog-to-digital converters, digital-to-analog converters, Ethernet plug-in board with a microcontroller, voltage regulators, FPGA configuration memory, voltage amplifiers, current amplifiers, oscillator, buffers/drivers and bus transceivers. The sample rate is 200 MHz and LVDS signalling standard is used between the DRFM circuit and the converters. The channel board has a JTAG interface which enables in-system programming of the FPGA. This implies that the DRFM can easily be redesigned. An external computer can manage the channel board via Ethernet. Software was developed for the microcontroller on the channel board and for the external computer. The function of the channel board is heavily dependent on the DRFM circuit. The channel board design resulted in the assembly of a prototype circuit board. Measurements were performed in a lab and the channel board was approved to be integrated in ELSI for further tests.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-7529 |
| Date | January 2006 |
| Creators | Andersson, Peter |
| Publisher | Linköpings universitet, Institutionen för systemteknik, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0012 seconds