During an earthquake, columns in a one-story building must support vertical gravity loads while undergoing large lateral drifts associated with deflections of the vertical seismic force resisting system and deflections of the flexible roof diaphragm. Analyzing the behavior of these gravity columns is complex since not only is there an interaction between compression and bending, but also the boundary conditions are not perfectly pinned or fixed. In this research, the behavior of steel columns that are square hollow structural sections (HSS) is investigated for stability using three design methods: elastic design, plastic hinge design, and pinned base design. First, for elastic design, the compression and flexural strength of the HSS columns are calculated according to the AISC specifications, and the story drift ratio that causes the interaction equation to be violated for varying axial force demands is examined. Then, a simplified design procedure is proposed; this procedure includes a modified interaction equation applicable to HSS column design based on a parameter, Pnh/Mn, and a set of design charts are provided. Second, a plastic hinge design is grounded in the concept that a stable plastic hinge makes the column continue to resist the gravity load while undergoing large drifts. Based on the available test data and the analytical results from finite element models, three limits on the width to thickness ratios are developed for steel square HSS columns. Lastly, for pinned base design, the detailing of a column base connection is schematically described. Using FE modeling, it is shown that it is possible to create rotational stiffness below a limit such that negligible moment develops at the column base. All the design methods are demonstrated with a design example / Master of Science / One-story buildings are one of the most economical types of structures built for industrial, commercial, or recreational use. During an earthquake, columns in a one-story building must support vertical gravity loads while undergoing large lateral displacements, referred to as story drift. Vertical loads cause compression forces, and lateral drifts produce bending moments. The interaction between these forces makes it more complex to analyze the behavior of these gravity columns. Moreover, since the column base is not perfectly fixed to the ground, there are many boundary conditions applicable to the column base depending on the fixity condition. For these reasons, the design for columns subjected to lateral drifts while supporting axial compressive forces has been a growing interest of researchers in the field. However, many researchers have focused more on wide-flange section (I-shape) steel columns rather than on tube section columns, known as hollow structural section (HSS) steel columns. In this research, the behavior of steel square tube section columns is investigated for stability using three design methods: elastic design, plastic hinge design, and pinned base design. First, for elastic design, the compression and flexural strength of the HSS columns are calculated according to current code equations, and the story drift that causes failure for varying axial force demands is examined. Then, a simplified design procedure is proposed including design charts. Second, a plastic hinge design is grounded in the concept that controlled yielding at the column base makes the column continue to resist the gravity load while undergoing large drifts. Based on the available test data and results from computational models, three limits on the width to thickness ratios of the tubes are developed. Lastly, for pinned base design, concepts for detailing a column base connection with negligible bending resistance is schematically described. Using a computational model, it is shown that the column base can be detailed to be sufficiently flexible to allow rotation. All the design methods are demonstrated with a design example.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/94024 |
| Date | 24 September 2019 |
| Creators | Kong, Hye-Eun |
| Contributors | Civil and Environmental Engineering, Eatherton, Matthew R., Sarlo, Rodrigo, Koutromanos, Ioannis |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds