The purpose of this thesis work was to investigate possible in-, on- or at-line methods to determine the degree of oxidation in dialdehyde cellulose. Several technologies were reviewed which led to a feasibility study into a possible on-line or at-line method using near infrared spectroscopy for determining the degree of oxidation in wet dialdehyde cellulose. A calibration model was built using the near infrared spectra of 19 samples created from kraft pulp with a degree of oxidation between 0 and 52.1 %. The obtained model uses five significant principal components and has a goodness of fit (R2) of 0.998 and a goodness ofprediction (Q2) of 0.991. The first principal component describes the degree of oxidation and the second the water content. A validation set of six samples was used to test the model and the predicted values resulted in a root mean square error of prediction of 0.85 in comparison with the reference method which had a pooled standard deviation of 0.69.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-55258 |
| Date | January 2017 |
| Creators | Brandén, Carl-Magnus |
| Publisher | Karlstads universitet, Avdelningen för kemiteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0012 seconds