Return to search

Excel Application Leverages XML to Configure Both Airborne Data Acquisition System and Ground Based Data Processing System

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Flight test instrumentation/data processing environments consist of three components: * Airborne Data Acquisition System * Telemetry Control Room * Post Test Data Processing System While these three components require the same setup information, most often they are configured separately using a different tool for each system. Vendor supplied tools generally do not interact very well with hardware other than their own. This results in the multiple entry of the configuration information. Multiple entries of data for large complex systems are susceptible to data entry errors as well as version synchronization issues. This paper describes the successful implementation of a single Microsoft Excel based tool being used to program the instrumentation data acquisition hardware, the real-time telemetry system, and the post test data processing system on an active test program. This tool leverages the XML interfaces provided by vendors of telemetry equipment.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/606007
Date10 1900
CreatorsDunnaville, Ted, Lindsey, Mark
ContributorsLockheed Martin Aeronautics Company
PublisherInternational Foundation for Telemetering
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Proceedings
RightsCopyright © held by the author; distribution rights International Foundation for Telemetering
Relationhttp://www.telemetry.org/

Page generated in 0.0016 seconds