The uterosacral ligaments (USLs) are important anatomical structures that support the uterus and apical vagina within the pelvis. As these structures are over-stretched, become weak, and exhibit laxity, pelvic floor disorders such as pelvic organ prolapse occur. Although several surgical procedures to treat pelvic floor disorders are directed toward the USLs, there is still a lot that is unknown about their function. These surgeries often result in poor outcomes, demonstrating the need for new surgical approaches and biomaterials. The first chapter of this dissertation presents a review of the current knowledge on the mechanical properties of the USLs. The anatomy, microstructure, and clinical significance of the USLs are first reviewed. Then, the results of published experimental studies on the {emph{in vivo}} and {emph{ex vivo}}, uniaxial and biaxial tensile tests are compiled. Based on the existing findings, research gaps are identified and future research directions are discussed. The second chapter proposes the use of planar biaxial testing, digital image correlation (DIC), and optical coherence tomography (OCT) to quantify the deformations of the USLs, both in-plane and out-of-plane. Using virgin swine as an animal model, the USLs were found to deform significantly less in their main direction (MD) of {emph{in vivo}} loading than in the direction perpendicular to it (PD) at increasing equibiaxial stresses. Under constant equibiaxial loading, the USLs deformed over time equally, at comparable rates in both the MD and PD. The thickness of the USLs decreased as the equibiaxial loading increased but, under constant equibiaxial loading, the thickness increased in some specimens and decreased in others. The third chapter presents new experimental methods for testing the {emph{ex vivo}} tensile properties of the uterosacral ligaments (USLs) in rats. USL specimens were carefully dissected to preserve their anatomical attachments, and they were loaded along their main {emph{in vivo}} loading direction (MD) using a custom-built uniaxial tensile testing device. This chapter reports the first mechanical data on the rat USLs in isolation from surrounding organs. It is also the first experimental study to provide measurements of the inhomogeneous deformations of the USLs during loading along their main textit{in vivo} loading direction, revealing that the USLs may behave as auxetic structures. The fourth and final chapter presents preliminary findings on novel imaging applications to characterize the evolving structure of the USLs before, during, and after tensile pulling along the ligaments' main textit{in vivo} axis of loading. Rat USLs were excised using the proposed novel dissection method and pulled uniaxially as was performed in the previous chapter. Before and after mechanical testing, second harmonic generation (SHG) was used to image collagen and muscle within the three anatomical regions of the USLs. During mechanical testing, OCT was used to collect out-of-plane images of the cervical/intermediate regions of the USL specimens, resulting in 3D volume scans of the regions. SHG images showed the USLs to have complex microstructures with significant wavy collagen bundles interwoven with muscle bundles. Preliminary observation of the microstructure during testing revealed interwoven sections of tissue with collagenous fibers that reoriented in all directions illustrating how the USLs may expand laterally during uniaxial loading, causing the auxetic properties documented in the previous chapter. Though more quantitative work remains to be done, the findings presented in this dissertation improve our understanding of how the USLs deform with increasing load, such as what occurs during pregnancy. Together, these studies serve as a springboard for future investigations on the supportive function of the USLs in animal models by offering guidelines on testing methods that capture their complex mechanical behavior. / Doctor of Philosophy / The uterosacral ligaments (USLs) are important anatomical structures that support the uterus and vagina and are often used to restore the support of pelvic organs during surgeries for pelvic organ prolapse. These surgeries often result in poor outcomes, demonstrating the need for new surgical approaches and graft materials. Due to their supportive role, the mechanical properties of the USLs are important for their physiological function, and they must be investigated to improve current treatment strategies for pelvic organ prolapse. To this end, we designed new equipment, dissection, and testing methods to characterize the mechanical behavior of the USLs using swine and rats as animal models. We provided the first three-dimensional characterization of time-dependent deformations of swine USLs as they were pulled along their two physiological loading directions using advanced imaging methods, including digital image correlation and optical coherence tomography. We isolated the USLs from rats with their anatomical attachments and mechanically tested them along their main physiological loading direction, reporting the first mechanical data on the rat USLs in isolation from surrounding organs. Finally, we used the advanced imaging techniques optical second harmonic generation microscopy and optical coherence tomography to determine how the microstructure (e.g., collagen and muscle) of the rat USLs evolves before, during, and after mechanical testing. These findings advance our understanding of the three-dimensional, nonlinear, heterogeneous, elastic, and viscoelastic deformations of the USLs. Our work may serve as a springboard for future investigations on the supportive function of the USLs by offering guidelines on testing methods that capture their complex mechanical behavior.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/113959 |
| Date | 24 February 2023 |
| Creators | Donaldson, Kandace E. |
| Contributors | Department of Biomedical Engineering and Mechanics, De Vita, Raffaella, Clark-Deener, Sherrie, Zhu, Yizheng, Staples, Anne E., Munson, Jennifer M. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0031 seconds