Return to search

考慮兩階段相依製程下量測誤差對指數加權移動平均管制圖之效應研究 / Effects of Measurement Error on EWMA Control Charts for Two-Step Process

無 / In this article, a two-step process is considered to investigate the effects of measurement errors on EWMA
and cause-selecting EWMA control charts. At the end of current process, a pair of imprecise measurements of in-coming quality and out-going quality is randomly taken with individual units.
The linear relationship between in-coming quality and out-going quality is assumed and four possible states of the process are defined with respective distributions of in-coming and out-going
qualities derived. The EWMA control chart with measurement error is then constructed to monitor small-scale shift in mean for the previous process while the cause-selecting control chart, or EWMA control chart based on residuals, including measurement error, is proposed to diagnose the state of current process.
Based on sensitivity analysis, the presence of imprecise measurement diminishes the power of both the EWMA and the proposed control charts and affects the detectability of process disturbances. Further, applications of proposed control charts are demonstrated through a numerical example to show some possible misuses of control charts. If the process mean shifts in a small scale when a single assignable cause occurs on each step, the proposed cause-selecting control chart is more sensitive than other control charts. The Hotelling T^2 control chart is also compared to illustrate the diagnostic advantage outweighed by proposed cause-selecting control chart.

Identiferoai:union.ndltd.org:CHENGCHI/G0090354015
Creators何漢葳, Ho, Han-Wei
Publisher國立政治大學
Source SetsNational Chengchi University Libraries
Language英文
Detected LanguageEnglish
Typetext
RightsCopyright © nccu library on behalf of the copyright holders

Page generated in 0.0019 seconds