Return to search

P-wave velocity model for the southwest of the Yilgarn Craton, Western Australia and its relation to the local geology and seismicity

[Truncated abstract] A number of controlled and natural seismic sources are utilised to model the Pwave velocity structure of the southwest of the Yilgarn Craton, Western Australia. The Yilgarn Craton is one of the largest pieces of Archaean crust in the world and is known for its gold and nickel deposits in the east and intraplate seismicity in the west. The aim of the project is to link 2D and 3D models of variations in seismic velocity with the local seismicity and geology. A new set of seismic refraction data, acquired in 25 overlapping deployments between 2002 and 2005, has been processed, picked and analysed using forward modelling. The data comprise two perpendicular traverses of three-component recordings of various delay-fired blasts from local commercial quarries. The data were processed using a variety of techniques. Tests were carried out on a number of data enhancement and picking procedures in order to determine the best method for enhancement of delay-fired data. A new method for automatic phase recognition is presented, where the maximum of the derivative of the rectilinearity of a trace is taken as the first break. Complete shot gathers with first break picks for each seismic source are compiled from the overlapping deployments. ... The starting 3D model was based on the models produced by 2D forward modelling. 14 iterations were carried out and the best-fit 3D model was achieved at the 10th iteration. It is 35% better then the current model used to locate earthquakes in this region. The resultant velocity block model was used to iii construct a density block model. A relative gravity map of the southwest of Yilgarn Craton was made. The results of 2D forward modelling, 3D tomography and forward gravity modelling have been compared and it was found that the HVZ is present in all models. Such a zone has been previously seen on a single seismic refraction profile, but it is the first time, this zone has been mapped in 3D. The gravity high produced by the zone coincides with the gravity high observed in reality. There is strong evidence that suggests that the HVZ forms part of the Archaean terrane boundary within the Yilgarn Craton. The distribution of the local seismicity was then discussed in the framework of the new 3D velocity model. A hypothesis, that the primary control on the seismicity in the study area is rotation of the major horizontal stress orientation, is presented. It is also argued that the secondary control on seismicity in the SWSZ is accommodation of movements along major faults.

Identiferoai:union.ndltd.org:ADTP/221431
Date January 2007
CreatorsGalybin, Konstantin A
PublisherUniversity of Western Australia. School of Earth and Geographical Sciences
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsCopyright Konstantin A. Galybin, http://www.itpo.uwa.edu.au/UWA-Computer-And-Software-Use-Regulations.html

Page generated in 0.0017 seconds