In order to quality assure and investigate material compositions in materials for components, safe methods need to be used to obtain correct results. When starting up a new analysis tool, a basic investigation is needed of how the tool is prepared, operated and how analysis data is interpreted. This is to maneuver the analysis tool correctly in the future work. Misuse of the analysis tool could potentially lead to the wrong material being selected for components and failure to respond to accident investigations. This thesis has been written at Husqvarna AB and its department Specialist Lab´s Material Laboratory. This study would lay the groundwork for how their new dynamic mechanical analysis tool should be used and operated to obtain correct material data for future analyzed materials. Dynamic mechanical analysis is a tool that has a wide range of application and Husqvarna's main purpose is to be able to analyze the dynamic mechanical properties of different polymers and rubber types. This study will primarily address an analysis of the dynamic properties of polyethylene FKM 70-1 in a DMA instrument. This is to carry out a successful analysis that can be used as a basis for future work in Husqvarna's DMA instrument.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hj-50046 |
| Date | January 2020 |
| Creators | Johnsson, Emil, Hellgren, Elvira |
| Publisher | Tekniska Högskolan, Jönköping University, JTH, Industriell produktutveckling, produktion och design, Tekniska Högskolan, Jönköping University, JTH, Industriell produktutveckling, produktion och design |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds