This thesis presents a systematic top-down methodology for simulating a
phase-locked loop using a macro model in Verilog-A. The macromodel has been
used to evaluate the jitter due to supply noise, thermal noise, and ground bounce.
The noise simulation with the behavioral model is roughly 310 times faster (best
case) and 125 times faster (worst case). The accuracy of the model depends on
the accurate evaluation of the non-linear transfer function from the various noisy
nodes to the output. By modeling the noise transfer function of the circuit as closely
as possible, 100% accuracy for the behavioral noise simulations compared with the
HSPICE noise simulations is obtained.
The macro model is written for a charge-pump phase-locked loop, but can
be easily extended to other architectures. The simulations are completed using
SpectreS in Cadence. The designer can use the model to estimate the jitter at the
output of the PLL in a top-down design methodology or cross verify the performance
of an existing chip in a bottom-up approach. / Graduation date: 2001
| Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/32786 |
| Date | 23 February 2001 |
| Creators | Bhagavatheeswaran, Shanthi, S. |
| Contributors | Fiez, Terri S. |
| Source Sets | Oregon State University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis/Dissertation |
Page generated in 0.0026 seconds