Abstract The Building sector is today an important sector in our society, which means that more people move from the urban area to the big cities, which in turn increases building production. The building and service sector is the largest energy waste in Sweden and internationally, which is about 40% of Sweden's total energy use and 60% of that energy goes to heating. The EU Directive Energy Performance of Buildings Directive (EPBD), implemented the concept of near zero-energy houses, which comes into full force in 2020, which means that all newly-built buildings must be energy-efficient with better energy performance than todays buildings. This is in connection with the need of houses/buildings and rental costs continuing to increase. For this reason, Ljusbo Hyreshus AB has invented a solution that includes both climatesmart rental apartments and cheap rental costs, which has attracted more than 20 communes (kommuner in Sweden) to offer land for these apartments. The purpose of this thesis is to find out the energy performance of one of Ljusbo Hyreshus AB's prototype module houses. Furthermore, improvement proposals would be developed to make the module house more energy efficient. The prototype house consisted of a single-storey modularhouse that stay in Söderhamn, which has been chosen in this thesis for further investigations. The house had a total area of 45 m2 and consisted of 3 rooms and kitchen. In this case study, the energy performance has been developed using analysis methods in the form of hand calculations and the energy signature method. Subsequently, the result of the analysis would be validated and would form the basis for later identification of various energy efficiency measures that contributed to the reduction of energy performance in the house and thereby achieved the passive house standard. The result shows that the modularhouse does not fullfil BBR's requirements at present, because the house misses important components which is important for energy performance. For this reason, improvement proposals, specifically regarding the climate shell, on energy efficiency measures have been developed in this report. With the help of these energy efficiency measures, which mainly consist of additional insulation and energy-efficient windows and with an energy-efficient ventilation system with heat recovery (FTX) and an installed air-water heat pump, the passive house standard has been possible to achieve. Future measures, such as the installation of solar cells, have also been examined in the report. This is due to converting the building from a passive house to a plus energy house.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hig-29781 |
| Date | January 2019 |
| Creators | Aljaberi, Saif, Majeed, Aram |
| Publisher | Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds