The behavior of jointed rock mass is very complex and is influenced by many factors such as location of joints, joint frequency, joint orientation and joint strength. A thorough review of literature on different aspects of jointed rock mass indicate that the discontinuities or planes of weakness present in rock mass significantly influence its behavior. Numerous experimental tests were conducted to study the behavior of natural as well as artificial joints in rocks. Laboratory tests are time consuming and give results applicable to specific joint fabric and confining pressure. Numerical methods are the best alternative to laboratory tests to study the behavior of jointed rock mass. With the advent of computers numerical methods of analysis have become very popular, as they are highly flexible and can represent all complex geometries and material behavior. The accuracy of a numerical model depends upon the how well constitutive relations for the jointed rock mass are defined in the analysis. Empirical relationships for describing the mechanical behavior of discontinuities obtained from scaling the laboratory data is crucial unresolved problem, which will affect the quality of results obtained. One more important aspect in the numerical model is strength criteria used for jointed rock mass. The applicability of existing strength criteria to a particular jointed rock has to be carefully examined before they are used.
Equivalent continuum approach simplifies the modeling of jointed rock mass as the joints are not modeled separately. Instead in equivalent continuum approach the jointed rock mass is represented by an equivalent continuum whose properties are defined by a combination of intact rock properties and joint properties. The accuracy of this kind of modeling depends upon the relationships used to define the jointed rock mass properties as a function of intact rock properties and joint properties. In the present study, an effort has been made (i) to establish empirical relations to define the properties of jointed rock mass as a function of intact rock properties and joint factor (ii) to develop a numerical model based on equivalent continuum approach using the empirical relations derived above, for easy and efficient modeling of jointed rock mass (iii) comparison of existing strength criteria for jointed rock masses using the equivalent continuum model developed above (iv) Modeling of joints explicitly and comparing these results with the equivalent continuum model results.
Empirical relationships expressing the uniaxial compressive strength and elastic modulus of jointed rock as a function of corresponding intact rock properties and joint factor have been derived based on the statistical analysis of large amount of experimental data of uniaxial and triaxial tests collected from the literature. The effect of joints in the jointed rock is taken in to account by the joint factor. A comparative study of the empirical relationships arrived by the above analysis has been made to choose the best relation for the numerical analysis. Empirical relationships thus arrived for jointed rock mass are used in the equivalent continuum approach to represent the jointed rock properties as a combination of intact rock properties and joint factor. Equivalent continuum model developed is thoroughly tested, validated and applied for single, multiple and block jointed rocks. The equivalent continuum model developed has been applied for analysis of the power cavern for Shiobara power station. Different strength criteria available for jointed rock namely Mohr-Coulomb, Hoek and Drown, Yudhbir et al. and Rarnamurthy are incorporated in the equivalent continuum model to evaluate their applicability for jointed rock masses. Ramarnurthy's strength criterion gives the best values of failure stress for almost all the test cases and hence used in the equivalent continuum model.
Alternatively, the joints in jointed rock mass are represented explicitly using interface element in the nonlinear finite element analysis. The explicit finite element model has been tested and validated using the experimental stress strain curves and failure stress values. Comparison of results obtained using equivalent continuum analysis and explicit modeling of joints has been given in the form of stress strain curves and failure stress plots for jointed rock masses along with the experimental results.
Some of the major conclusions from the present study are as follows. Statistical relationships arrived to express the properties of the jointed rock as a function of intact rock and joint factor give a fair estimate of jointed rock in the absence of experimental data. Equivalent continuum model developed using statistical relations arrived above simplifies the numerical modeling of jointed rock to a large extent and also gives a fair estimate of jointed rock behavior with minimum input data. From the equivalent continuum analysis of Shiobara power cavern, it can be concluded that this approach is very advantageous for modeling highly discontinuous systems provided the joint factor is estimated properly so that it represents the real fabric of the joints present in the system. Comparison of different strength criteria shows that Ramamurthy's strength criterion is the best for jointed rocks. When the rock mass has one or two major joints it is advantageous to model it explicitly so that the behavior of the joint can be studied in detail. Explicit representation of the joints in the finite element analysis gives a lair estimate of the zones most susceptible to failure in a jointed rock. From comparison of experimental values, equivalent continuum model results and the explicit joint model results, it can be concluded that results obtained using equivalent continuum model are nearest to the experimental results in almost all the cases.
| Identifer | oai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/257 |
| Date | 04 1900 |
| Creators | Jade, (B) Sridevi |
| Contributors | Sitharam, T G |
| Publisher | Indian Institute of Science |
| Source Sets | India Institute of Science |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis and Dissertation |
| Format | 27467427 bytes, application/pdf |
| Rights | I grant Indian Institute of Science the right to archive and to make available my thesis or dissertation in whole or in part in all forms of media, now hereafter known. I retain all proprietary rights, such as patent rights. I also retain the right to use in future works (such as articles or books) all or part of this thesis or dissertation. |
Page generated in 0.0025 seconds