Biobased materials made from renewable resources, such as wood, play an important role in the sustainable development of society. One main challenge of biobased building materials is their inherent moisture sensitivity, a major cause for fungal decay, mold growth and dimensional instability, resulting in decreased service life as well as costly maintenance. A new building material known as wood-plastic composites (WPCs) has emerged. WPCs are a combination of a thermoplastic matrix and a wood component, the former is usually recycled polyethylene or polypropylene, and the latter a wood processing residual, e.g. sawdust and wood shavings. The objective of this thesis was to gain more insight about characteristics of WPCs containing a modified wood component. The hypothesis was that a modified wood component in WPCs would increase the moisture resistance and durability in outdoor applications. The study comprises both injection molded and extruded WPC samples made with an unmodified, acetylated, thermally modified or furfurylated wood component in a polypropylene (PP), high density polyethylene (HDPE), cellulose ester (CAP, a cellulose ester containing both acetate and propionate substituents) or polylactate (PLA) matrix. The WPCs were prepared with 50-70 weight-% wood. The emphasis was on studying the moisture sorption, fungal resistance and micromorphological features of these new types of composites. Water sorption in both liquid and vapor phases was studied, and the biological performance was studied both in laboratory and in long term outdoor field tests. Micromorphological features were assessed by analyzing of the wood component prior to and after processing, and by studying the composite microstructure by means of a new sample preparation technique based on UV excimer laser ablation combined with scanning electron microscopy (SEM). Results showed that the WPCs with a modified wood component had a distinctly lower hygroscopicity than the WPCs with unmodified wood, which resulted in less wood-plastic interfacial cracks when subjected to a moisture soaking-drying cycle. Durability assessments in field and marine tests showed that WPCs with PP or CAP as a matrix and 70 weight-% unmodified wood degraded severely within a few years, whereas the corresponding WPCs with a modified wood component were sound after 7 years in field tests and 6 years in marine tests. Accelerated durability tests of WPCs with PLA as a matrix showed only low mass losses due to decay. However, strength losses due to moisture sorption suggest that the compatibility between the PLA and the different wood components must be improved. The micromorphological studies showed that WPC processing distinctly reduces the size and changes the shape of the wood component. The change was most pronounced in the thermally modified wood component which became significantly reduced in size. The disintegration of the modified wood components during processing also creates a more homogeneous micromorphology of the WPCs, which may be beneficial from a mechanical performance perspective. Future studies are suggested to include analyses of the surface composition, the surface energy and the surface energy heterogeneity of both wood and polymer components in order to tailor new compatible wood-polymer combinations in WPCs and biocomposites. / <p>QC 20121119</p>
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-105217 |
| Date | January 2012 |
| Creators | Segerholm, Kristoffer |
| Publisher | KTH, Byggnadsmaterial, Stockholm |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Trita-BYMA, 0349-5752 ; 2012:2 |
Page generated in 0.002 seconds