Return to search

Koncept för koppling av boj till generator i ett vågkraftverk

Den största delen av all energi på jorden utvinns idag från fossila bränslen. Detta innebär stora faror för miljön såsom utsläpp av växthusgaser. För att uppnå en hållbar utveckling behöver vi miljövänliga och förnybara energikällor. Vågkraft är därför en bra lösning för framtidens energiförsörjning med många fördelar. På avdelning för Elektricitetslära i Ångströmslaboratoriet vid Uppsala universitet jobbar man med utvecklingen av ett vågkraftkoncept där en boj som flyter på havsytan kopplas till en generator på havets botten. Arbetet sker inom det så kallade Lysekilsprojektet och systemet testas på en anläggning i Lysekil på västkusten. I den befintliga konstruktionen kopplas bojen med hjälp av tre kättingar till en vajer som går till generatorn. På grund av vågornas rörelse uppstår nötningar där de tre kättingarna kopplas till bojen och till varandra. Det finns också stor risk för korrosion. Syftet med detta examensarbete är att komma på ett nytt koncept för infästningen mellan bojen och vajern till generatorn. Målet är att minska nötningen och på så sätt minska behovet av underhållsarbete. Det första steget i arbetet var att generera flera koncept på möjliga konstruktionslösningar. Ett koncept som baseras på att fyra balkar placeras ovanpå bojen med en platta i mitten där vajern fästes med hjälp av en fästanordning valdes som det lämpligaste konceptet. Konceptet vidareutvecklades med hjälp av CAD-programmet SolidWorks. Konstruktionen som arbetades fram motsvarar till största delen den kraftspecifikation som arbetades fram i början av projektet. Den kan klara av en kraft på 500 kN, som kan uppstå vid de största vågorna. Den har inga rörliga delar, så det kommer inte att ske någon nötning. Istället för kättingar används en vajer som är väl skyddad mot korrosion. Konstruktionen behöver inte lika mycket underhåll som den befintliga konstruktionen med kättingar. Den är också lätt att montera, förutsatt att rätt verktyg konstrueras. / Today most of all energy on earth is produced from fossil fuels. This presents a danger to the environment such asemission of greenhouse gases. In order to achieve sustainable development we need clean and renewable energy sources. Wavepower is a good solution for future energy supply, with many advantages. The Department of Electricity in the Ångström Laboratory at Uppsala University works with the development of a wave power concept where a buoy floating on the sea surface is connected to a generator on the sea floor. The work is performed within the so-called Lysekilproject and the system is tested at a facility in Lysekil on the Swedish west coast. In the existing design, a buoy is connected to the wire that goes from the generator by means of three chains. Due to wave movement wear occurs where the three chains are coupled to the buoy and to each other. There is also a risk of corrosion. The purpose of this thesis is to come up with a new concept of attachment between the buoy and wire to the generator. The objective is to reduce wear, thus reducing the need for maintenance work. The first stage of this work was to generate several concepts of possible design solutions. A concept which is based on four beams placed on top of the buoy and a plate in the middle where the wire is secured by a fastener was selected as the preferred concept. This concept was further developed using the CAD-program SolidWorks. The final structure corresponds to a large extent to the requirement specification which was developed in the beginning of the project. It can withstand a force of 500 kN, which may arise due to the biggest wave during a storm. It has no moving parts, so there will be no wear. Instead of chains a wire is used, which is well protected against corrosion. The proposed design does not need as much maintenance as the existing structure with chains. It is also easy to assemble, provided that the right tool is constructed.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-176971
Date January 2012
CreatorsMahbob, Feroz
PublisherUppsala universitet, Elektricitetslära
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageSwedish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0398 seconds