Return to search

Kraftmätning på cykelpedal

This report will describe the development of a subsystem for force measurement on bicycle pedals. The force is going to be used as a control parameter in a motor controller to control an electric motor on an electric bicycle. The report focuses on force measurement and will not process any control system. There has also been a survey of alternative power supplies to the circuit boards to be used in this project. Energy Harvesting has been investigated as an alternative source. The aim of the project is to measure the force applied on the pedal in a good way for use in a control system.This work resulted in that the force applied on the pedals was measured on the crank arms. The force was being measured by strain gauge sensors in a test rig designed in this project. The force signal can be used in the intended control system. This report has explained when, during a pedal stroke, the force should be measured. Processing of the signal will be done furthermore in the motor controller to fit the requirements set by the control system.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hh-36724
Date January 2018
CreatorsGrip, Andreas
PublisherHögskolan i Halmstad, Akademin för informationsteknologi
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0014 seconds