The paper compares electricity production between the semi-submersible and the spar-buoy floating wind turbine systems under normal, stochastic and extreme wind conditions at Utsira Nord site located on the Norwegian continental shelf in the North Sea. The analysis of complex behavior of the floating wind turbine system and the fluid-structure interaction is performed in aero-servo-hydro-elastic code ASHES. The results indicate a slightly better energy performance of the semi-submersible than the spar in all load cases but one. The pitch and heave degrees of freedom are evaluated as the most relevant for the power output. It is shown that pitch and heave platform motions have smaller displacement in the semi-submersible floater than in the spar under average environmental conditions and at the rated wind speed operating range. The simulation also confirmed that the energy yield is very sensitive to the magnitude of the loads: the spar performed best under mild environmental conditions, while the semi-submersible was better under medium environmental conditions. Small difference in energy yield is attributed to the same baseline blade and external controller properties used for both floaters where generator torque was kept constant to limit the power excursions above the rated power. The method proposed under this paper has demonstrated that a good approximation of the energy performance of the floating wind turbine system can be performed in a fast and effective manner.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-381386 |
| Date | January 2018 |
| Creators | Saracevic, Nermina |
| Publisher | Uppsala universitet, Institutionen för geovetenskaper |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds