Return to search

Design, Fabrication & Characterization of Organic Photovoltaic Devices

<P> In this thesis, several methods of material integration into organic photovoltaic
devices are investigated by fabricating solution processed and vacuum coated devices.
Each of these methods is aimed at examining and improving one or more of the four
critical factors that determine solar cell efficiency: (1) photovoltage, (2) light absorption,
(3) exciton separation, and ( 4) charge collection. To investigate and improve
photovoltage, the photovoltaic properties of different M-Phthalocyanine/Fullerene
(M-Pc/C60 ) blends are measured and demonstrate an improved open circuit voltage
(Voc) using trivalent-metal phthalocyanine. Rubrene is also added to the tl-Pc/C60
cells and shown to systematically increase the Voc. To improve light absorption, two
new device structures are developed: the parallel tandem cell and the heteromorphic
cell. The parallel tandem cell is demonstrated using both all-vacuum coated materials
as well as a combination of vacuum and solution processed materials. Results show
definitive and significant current contribution from the near-infrared (NIR) wavelengths,
and concomitant increase in photocurrent and power conversion efficiency
(PCE). The heteromorphic cell demonstrates the integration of two polymorphs of
the same M-Pc, yielding a broader external quantum efficiency (EQE) spectrum in
the IR region and an increase in the overall PCE. To investigate exciton separation
and charge collection, time of flight photoconductivity studies are performed on varying
compositions of solution processed polymer/fullerene films as well as pristine and
blended M-Pc:C60 films. Results verify the necessity for balanced carrier transport
in blended systems, and t he importance of carrier mobility for achieving high fill factors.
Finally, the stability of a relatively new polythiophene (PQT-12) in an organic
solar cell is investigated , and shown to significantly increase the device lifetime as
compared to the standard P3HT polymer. </p> / Thesis / Doctor of Philosophy (PhD)

Identiferoai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/19432
Date January 2010
CreatorsYuen, Avery
ContributorsLoutfy, Rafik 0., Preston, John S., Engineering Physics
Source SetsMcMaster University
LanguageEnglish
Detected LanguageEnglish

Page generated in 0.1022 seconds