The emergence of organic semiconductors is exciting since it promises to open up for straightforward and low-cost fabrication of a wide range of efficient and novel electronic devices. However, in order for this promise to become reality it is critical that new and functional fabrication techniques are developed. This thesis demonstrates the conceptualization, development, realization and implementation of a particularly straightforward and scalable fabrication process: the photo-induced and resist-free imprint patterning technique.Initial experiments revealed that some members of a group of carbon-cage molecular semiconductors – termed fullerenes – can be photochemically modified into dimeric or polymeric structures during exposure to laser light, and, importantly, that the exposed fullerene material retains its good electron-transport property while its solubility in common organic solvents is drastically lowered. With this information at hand, it was possible to design and create well-defined patterns in a solution-deposited fullerene film by exposing selected film areas to laser light and then developing the entire film in a tuned developer solution. An electronically active fullerene pattern emerges at the locations defined by the incident laser beam, and the patterning technique was successfully utilized for the fabrication of arrays of efficient field-effect transistors.In a later stage, the capacity of the photo-induced and resist-free imprint technique was demonstrated to encompass the fabrication of ubiquitous and useful CMOS circuits. These are based on a combination of p-type and n-type transistors, and a blend between a p-type organic semiconductor and an n-type fullerene compound was designed so that the latter dominated. By solution-depositing the blend film on an array of transistor structures, exposing selected transistors to laser light, and then developing the entire transistor array in a developer solution, it was possible to establish a desired combination of (non-exposed) p-type transistors and (exposed) n-type transistors. We finally utilized this combination of transistors for the fabrication of a CMOS circuit in the form of well a-functional organic inverter stage.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-22127 |
| Date | January 2009 |
| Creators | Dzwilewski, Andrzej |
| Publisher | Umeå universitet, Fysik, Umeå : Print & Media |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds