The object of the work described in this thesis was to develop GaAs integrated circuit modeling techniques based on a modified version of SPICE 2, then layout, fabricate, model and test ion implanted GaAs MESFET integrated sample and hold circuits.
A large signal GaAs MESFET model was used in SPICE to evaluate the relative performance of inverted common drain logic (ICDL) digital integrated circuits compared to other circuit configurations.
The integrated sample and hold subsequently referred to as an integrated sampling amplifier block(ISAB), uses a MESFET switch with either one or two guard gates to suppress strobe feedthrough.
Performance guidelines suggested by the project sponsor indicate an optimal switch sampling pulse width capability of 25 ps with 5 ps rise and fall time. Guard gates are included in the switch layout to evaluate pulse feedthrough minimization. The project sponsor suggested -20 dB pulse feedthrough isolation and minimum sampling switch off isolation of -20 dB at 10 GHz as project guidelines.
Simulations indicate that a 0.5 µm gate length process approaches the suggested performance guidelines. A mask layout was designed and modeled including both selective implant and refractory self aligned gate processes. The refractory self aligned gate process plasma etched t-gate structure produces a sub 0.5 µm gate length. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/26733 |
| Date | January 1987 |
| Creators | Rutherford, William C. |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0029 seconds