The main aim of the work was the investigation of the effect of operational parameters of the combustion process (combustion air excess, primary fuel ratio) and burner constructional parameters (the pitch angle of secondary nozzles, tangential orientation of secondary nozzles towards the axis of the burner) on the formation of NOx and CO, flue gas temperature, the shape, dimensions and stability of the flame, in-flame temperatures in the horizontal symmetry plane of the combustion chamber and the amount of heat extracted from the hot combustion gases in the combustion chamber’s shell. Experimental activities were carried out in the laboratory of the Institute of Process and Environmental Engineering, which is focused on burners testing. The combustion tests were performed with the experimental low-NOx type burner, namely the two-gas-staged burner. Mathematical model developed based on the experimental data describes the dependency of NOx on the operating parameters of the combustion process and burner constructional parameters. The model shows that increasing air excess and increasing angle of tangential orientation of the secondary nozzles reduce the formation of NOx. The temperature peaks in the horizontal symmetry plane of the combustion chamber decreases with increasing combustion air excess. The thermal load to the combustion chamber’s wall along the length of the flame was evaluated for selected settings. It was validated that the thermal efficiency of is reduced when higher air excess is used.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:232142 |
| Date | January 2015 |
| Creators | Nykodým, Jiří |
| Contributors | Hudák, Igor, Bělohradský, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds