Return to search

Study on fabrication of fused quartz nano-structures by focused ion beam

The fabrication characteristic of focused ion beam (FIB) for fused quartz was investigated. With the progress of nanotechnology, new technologies and devices are invented constantly. In nanofabrication, FIB has several advantages such as high material removal rate, high resolving power and direct fabrication in some selected areas without etching mask. Therefore, it had been studied in detail to fabricate nano-structures by FIB. In this study, we found out the effect of nano-machining by adjusting the parameters of FIB system such as: beam current, overlap, and dwell time. The fabricated features together with their surface morphology and profile were investigated by scanning electron microscope (SEM) and atomic force microscope (AFM). Results show that when beam current was smaller, overlap was 50% and dwell time was 10£gs could get best performance by FIB.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0725108-141846
Date25 July 2008
CreatorsYang, Shun-Jie
ContributorsTsai, Nan-Chyuan, Pan, Cheng-Tang, Chao,Chien-Hsiang, Lin, Che-Hsin
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0725108-141846
Rightswithheld, Copyright information available at source archive

Page generated in 0.0019 seconds