The object of this research was to develop a retort for research and development of thermal processes which use common commercial thermal processing techniques. An FMC 500W laboratory sterilizer, designed to operate with an FMC weir product racking system, was modified for conventional steam, positive flow steam/air and water immersion/air overpressure thermal processing of foods in thin profile retortable packages. The research included the modification of the retort plumbing and the fabrication of a set of product trays and a racking system. The completed system was tested for temperature distribution and stability, and heat transfer distribution for each processing mode. The latter was achieved by comparing the heat penetration parameters calculated from the centerpoint temperature histories of conduction heating teflon transducers. / Applied Science, Faculty of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/26683 |
| Date | January 1987 |
| Creators | Britt, Ian John |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0019 seconds