The use of timber in building structures is steadily increasing. cross laminated timber (CLT) is an engineered wood product made of an uneven number of layers of lamellas glued at an angle of 90 degrees to each other. This gives CLT high stiffness and strength to bending in all directions, and capability of taking load both in-plane and out-of-plane. Due to the large size of CLT elements, they allow for quick assembly of strong structures. Due to both economic and environmental reasons it is important for producers of CLT to optimize the use of the wood material by using the timber with higher stiffness and strength where it is most needed. This thesis is about evaluating the bending and shear stiffness of CLT elements, when used as plates, depending on the quality of wood used in the different layers. Four-point bending tests are carried out on elements of different compositions and a parametrized finite element model is created. Thus, the model is validated on the basis of experimental tests to evaluate the influence of different quality of different layers. The measured dynamic MoE proved to have good potential to be used as the longitudinal bending stiffness in an FE-model, with a deviation from the experimental tests of less than 1%. There is a strong correlation between the bending stiffness and bending strength of the plates. The effective rolling shear modulus in pine was calculated to be around 170 MPa for pine of dimension 40 x 195 mm2 . Grading the boards into two different classes used for different layers proved to increase the MoE of the plates by 11-17% for 3- and 5-layer CLT.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:lnu-104766 |
| Date | January 2021 |
| Creators | Svensson Meulmann, Sebastian, Latifi, Egzon |
| Publisher | Linnéuniversitetet, Institutionen för byggteknik (BY), Linnéuniversitetet, Institutionen för byggteknik (BY) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0021 seconds