The behaviour of the quasi-harmonic type frictional oscillation for steel sliding surfaces was investigated both experimentally and theoretically.
The kinetic coefficient of friction, which was expressed as a function of sliding velocity, was represented by a polynomial. The slowly varying amplitude and phase method of Kryloff and Bogoliuboff was used to solve the non-linear differential equation of motion. The calculations were carried out on the computer. The theoretical analysis suggests that the amplitude of the quasi-harmonic oscillation increases almost linearly as the driven surface velocity increases until a critical velocity is reached where the friction-velocity curve begins to flatten out. Beyond this point the oscillation diminishes to zero.
Experiments were carried out mainly on unlubricated surfaces at driven surface velocities ranging from 0.5 in/sec to 25 in/sec. The results revealed that for short running distances frictional oscillation of the stick-slip type could occur. Frictional oscillation of the quasi-harmonic type existed in the system when negative slope appeared in the low velocity region of the friction-velocity curve after a run-in period. The growth and decay of the vibration amplitude with variation in driven surface velocity has been observed and this substantiates the findings of the theoretical analysis. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/37549 |
| Date | January 1965 |
| Creators | Ko, Pak Lim |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0015 seconds