An easy and reliable way to join two or more components is to use a bolted joint. When torque is applied on the bolt head, a clamp force is achieved. However about 90% of this torque will be used just to overcome the friction in the interfaces. To be able to fasten these in an ecient and precise manner the friction in the bolt threads and underhead area is important to understand. This is currently investigated at Atlas Copco by using a friction test rig, FTR, which measures the clamp force, the total torque and the shank torque. To evaluate the test rig and also to be able to evaluate dierent friction models, a parameterised simulation model of a bolted joint is built. This is a 3D-model of the joint containing a bolt, a nut and a test specimen. The stiness and frictional behaviour of the FTR is used in the model to get a good comparison between these two. Dierent contact formulations and settings are tested to achieve a good model. Also, mesh size, step size and material models are evaluated to see the eect of these. The results show a good correlation between the FTR data and the simulation model. For the total torque to clamp force ratio a dierence of about 1% is achieved. The average dierence in shank torque and underhead torque is at 3.1% and -1.6% respectively. The pressure distribution for this model is shown to be unevenly distributed along the threads. This is minimized by softening the contact, but this instead increases the error between the FTR data and the simulation model. For the evaluation of friction models that are based on the contact pressure this needs to be investigated further to nd a good compromise between the contact pressure and the frictional behaviour.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-74490 |
Date | January 2019 |
Creators | Nykänen, Robin |
Publisher | Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0048 seconds