The Analog to Digital Converter (ADC) is an inevitable part of video AnalogFront Ends (AFE) found in the electronic displays today. The need to integratemore functionality on a single chip (there by shrinking area), poses great designchallenges in terms of achieving low power and desired accuracy.The thesis initially focuses upon selection of suitable Analog to Digital Converter(ADC) architecture for a high definition video analog front end. SuccessiveApproximation Register (SAR) ADC is the selected architecture as it scales downwith technology, has very less analog part and has minimal power consumption.In second phase a mathematical model of a Time-Interleaved Successive ApproximationRegister (TI-SAR) ADC is developed which emulates the behavior ofSAR ADC in Matlab and the errors that are characteristic of the time interleavedstructure are modeled.In the third phase a behavioral model of TI-SAR ADC having 16 channels and12 bit resolution, is built using the top-down methodology in Cadence simulationtool. All the modules were modeled at behavioral level in Verilog-A. The functionalityof the model is verified by simulation using signal of 30 MHz and clockfrequency of 300 MHz, using a supply voltage of 1.2 V. The desired SNDR (Signalto Noise Distortion ratio) 74 dB is achieved.In the final phase two architectures of comparators are implemented in 65nmtechnology at schematic level. Simulation results show that SNDR of 71 dB isachievable with a minimal power consumption of 169.6 μWper comparator runningat 300 MHz.NyckelordKeywords
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-63854 |
| Date | January 2010 |
| Creators | Qazi, Sara |
| Publisher | Linköpings universitet, Elektroniksystem |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds