Fuel cells are electricity generators which convert chemical energy of hydrogen directly to electricity by means of electrochemical oxidation and reduction reactions. A single proton exchange membrane (PEM) fuel cell can only generate electricity with a potential between 0.5V and 1V. The useful potential can be achieved by stacking cells in series to form a PEM fuel cell stack. There is a potential to utilize 100W class fuel cells. Fuelling is the major problem of the portable fuel cells.
The aim of this thesis is to design and manufacture a PEM fuel cell stack which can be used for portable applications. The PEM fuel cell stack is planned to be incorporated to a NaBH4 hydrolysis reactor for H2 supply. Within the scope of this thesis a new coating technique called &ldquo / ultrasonic spray coating technique&rdquo / is developed for membrane electrode assembly (MEA) manufacturing. New metal and graphite bipolar plates are designed and manufactured by CNC technique. A fuel cell controller hardware is developed for fuel supply and system control.
The power densities reached with the new method are 0.53, 0.74, 0.77, and 0.88 W/cm2 for 20%, 40%, 50%, 70% Pt/C catalyst by keeping 0.4mg Pt/cm2 platinum loading constant, respectively. The power density increase is 267% compared to
&ldquo / spraying of catalyst ink with air pressure atomizing spray gun&rdquo / .
All parts of the PEM fuel cell stack designed were produced, assembled, and tested. The current density reached is 12.9A at 12 V stack potential and the corresponding electrical power of the stack is 155W.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12613564/index.pdf |
Date | 01 September 2011 |
Creators | Erkan, Serdar |
Contributors | Eroglu, Inci |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | Ph.D. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0184 seconds