Numerous recurrent situations following mixing and pumping of mortars and concretes cause degradation of fluidity and hardening characteristics. Which, in turn, lead to adverse effects on the quality of workmanship and structural defects.
Nonetheless, relatively little research on the mixing and pumping energies used for the onsite transport and preparation of mortar or concrete has been directed at the core reasons or mechanisms for changes in technological properties.
This dissertation describes and explains the effects of various mixing and pumping parameters on the mortar characteristics in a field trial and on a laboratory scale.
Observations using a rheograph revealed that shearing action does exhibit the most pronounced influence on the characteristics of mortars during the pumping. The performed investigations indicate that higher shearing actions, for example, excessive mixing duration and long-distance pumping lead to reduced flowability, accelerated and increased hydration rate, increased early compressive strength and early-age shrinkage.
From these findings, the underlying mechanism responsible for acceleration and increase of hydration rate is pinpointed as: the increased dissolution from the active surface area due to the destruction of the protective superficial layers of cement
grains, as well as a transition from flocculation to dispersion. The creation of new surfaces leads to further consumption of active super plasticizer in solution phase and to subsequent degrading changes in fluidity (decreasing flowability). The degradation of fluidity and densification of microstructure provoked by the hydration changes do increase the early age shrinkage of mortar.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:105-qucosa-156776 |
Date | 09 December 2014 |
Creators | Takahashi, Keisuke |
Contributors | TU Bergakademie Freiberg, Maschinenbau, Verfahrens- und Energietechnik, Prof. Dr.-Ing. Thomas A. Bier, Prof. Dr.-Ing. Thomas A. Bier, Prof. Dr. –Ing. Harald Garrecht, Prof. Dr. Eng. Makoto Kawakami |
Publisher | Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola" |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | doc-type:doctoralThesis |
Format | application/pdf |
Page generated in 0.0023 seconds