The mechanisms by which magnetisation changes occur in magnetic materials may be investigated by a variety of hysteresis measurements. During this study both alternating and rotational hysteresis measurements were used to characterise the mechanisms of magnetisation change in a number of permanent magnet materials. Studies of the time dependence of magnetisation, remanent magnetisations and the dependence of the reversible magnetisation on the irreversible magnetisation were undertaken. These studies revealed that in sintered rare-earth iron magnets the magnetisation change is predominately controlled by domain nucleation, with a lesser contribution from domain wall pinning within the boundary regions of the grains. Similar mechanisms control the magnetisation change in the larger grains of melt-quenched rare-earth iron magnets. In the single domain grains of the melt-quenched materials incoherent rotation mechanisms control the changes of magnetisation. Magnetisation change in MnAlC and sintered AlNiCo was found to be controlled by domain wall pinning within the interior of the grains of the materials. Two devices were constructed for the measurement of rotational hysteresis. The first measures the angular acceleration of a sample set spinning in a magnetic field, from which the rotational hysteresis loss may be determined. The second employs rotating search coils to make direct measurements of the component of magnetisation that contributes to rotational hysteresis loss during the rotation of a sample in a field. Both devices were found to produce data consistent with that in the literature and to be useful for the characterisation of rotational hysteresis in permanent magnet materials. A simple model was used to examine the dependence of rotational hysteresis loss on various material parameters. It was found that the value of the rotational hysteresis integral is dependent on interactions and to a lesser extent distributions in anisotropy. This is contrary to assumptions commonly made in the literature but consistent with published experimental data, which has been reinterpreted. Measurements of rotational hysteresis losses in the materials studied were found to be effected by geometric demagnetisation effects. A method by which such data may be corrected for these effects is proposed. Following correction and consideration of the interactions within the materials, the rotational hysteresis data was found to be consistent with the characterisations performed in linearly alternating fields.
| Identifer | oai:union.ndltd.org:ADTP/221020 |
| Date | January 2004 |
| Creators | Harrison, Simon Andrew |
| Publisher | University of Western Australia. School of Physics |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Simon Andrew Harrison, http://www.itpo.uwa.edu.au/UWA-Computer-And-Software-Use-Regulations.html |
Page generated in 0.0017 seconds