Return to search

Contribution à la modélisation de l'anisotropie induite par endommagement d'un matériau agrégataire énergétique / Contribution to modeling of induced anisotropy of damage for a material aggregate explosive

Le matériau composite agrégataire énergétique étudié a un comportement viscoélastique endommageable sensible à la pression de confinement et à la température. Ces travaux concernent la modélisation de l'anisotropie induite par endommagement avec deux objectifs principaux. Dans un premier temps, le caractère anisotrope de l'endommagement est mis en évidence expérimentalement. Des essais alternant tension et compression permettant d'observer l'effet unilatéral d'endommagement. Ensuite, un modèle de comportement est développé pour le matériau d'étude. Des modèles pertinents sont tout d'abord comparés. Le modèle le plus approprié est ensuite amélioré par l'ajout de mécanismes d'endommagement, d'effectivité du dommage et d'un mécanisme de plasticité. Les données expérimentales sont utilisées pour identifier les paramètres du modèle. Ce dernier a été ensuite implémenté dans un logiciel de calcul aux éléments finis (Abaqus / standard) sous la forme d'une procédure Fortran (UMAT). Différents types de chargements sont simulés et confrontés aux résultats expérimentaux. / An explosive aggregate material exhibits a visco-elastic behaviour with damage, internal friction and sensitivity to the confining pressure and temperature. This thesis focuses on the anisotropic elastic damage with unilateral effect. The first aim of this study is to highlight experimentally the anisotropic nature of the damage. Then, a new model is proposed for the studied material. This is achieved using a comparison of some relevant models in order to select the most appropriate among them. The selected model is then improved by adding unilateral effect mechanisms and plasticity. Experimental data is used to characterize the material behaviour and to determine the parameters of improved model. This model has been implemented in the finite element software (Abaqus / Standard) using Fortran procedure (UMAT) and then tested for different loads and compared with experimental results.

Identiferoai:union.ndltd.org:theses.fr/2013TOUR4018
Date30 September 2013
CreatorsBenelfellah, Abdelkibir
ContributorsTours, Picart, Didier
Source SetsDépôt national des thèses électroniques françaises
LanguageFrench
Detected LanguageFrench
TypeElectronic Thesis or Dissertation, Text

Page generated in 0.0095 seconds