Return to search

Bandgap Engineering of 1300 nm Quantum Dots/Quantum Well Nanostructures Based Devices

The main objectives of this thesis are to develop viable process and/or device technologies for bandgap tuning of 1300-nm InGaAs/GaAs quantum-dot (QD) laser structures, and broad linewidth 1300-nm InGaAsP/InP quantum well (QW) superluminescent diode structures. The high performance bandgap-engineered QD laser structures were achieved by employing quantum-dot intermixing (QDI) based on impurity free vacancy diffusion (IFVD) technique for eventual seamless active-passive integration, and bandgap-tuned lasers. QDI using various dielectric-capping materials, such as HfO2, SrTiO3, TiO2, Al2O3 and ZnO, etc, were experimented in which the resultant emission wavelength can be blueshifted to ∼ 1100 nm ─ 1200 nm range depending on process conditions. The significant results extracted from the PL characterization were used to perform an extensive laser characterization. The InAs/GaAs quantum-dot lasers with QDs transition energies were blueshifted by ~185 nm, and lasing around ~1070 – 1190 nm was achieved. Furthermore, from the spectral analysis, a simultaneous five-state lasing in the InAs/InGaAs intermixed QD laser was experimentally demonstrated for the first time in the very important wavelength range from 1030 to 1125 nm. The QDI methodology enabled the facile formation of a plethora of devices with various emission wavelengths suitable for a wide range of applications in the infrared. In addition, the wavelength range achieved is also applicable for coherent light generation in the green – yellow – orange visible wavelength band via frequency doubling, which is a cost-effective way of producing compact devices for pico-projectors, semiconductor laser based solid state lighting, etc. [1, 2]

In QW-based superluminescent diode, the problem statement lies on achieving a flat-top and ultra-wide emission bandwidth. The approach was to design an inhomogeneous active region with a comparable simultaneous emission from different transition states in the QW stacks, in conjunction with anti-reflection coating and tilted ridge-waveguide device configuration. In this regard, we achieved 125 nm linewidth from InGaAsP/InP multiple quantum well (MQW) superluminescent diode with a total output power in excess of 70 mW with an average power spectral density of 0.56 mW/nm, and a spectral ripple of ≤1.2 ± 0.5 dB. The high power and broadband SLD with flat-top emission spectrum is a desirable as optical source for noninvasive biomedical imaging techniques employing low coherence interferometry, for instance, optical coherence tomography (OCT).

Identiferoai:union.ndltd.org:kaust.edu.sa/oai:repository.kaust.edu.sa:10754/611224
Date29 May 2016
CreatorsAlhashim, Hala H.
ContributorsOoi, Boon S., Physical Science and Engineering (PSE) Division, Beaujuge, Pierre, Rothenberger, Alexander, Aimez, Vincent
Source SetsKing Abdullah University of Science and Technology
LanguageEnglish
Detected LanguageEnglish
TypeDissertation

Page generated in 0.002 seconds