Return to search

Sputtered Transparent Contact Layers for Bifacial and Tandem Solar Cells

A key to solar cells with lower environmental impact is higher efficiency and reduced material usages. Bifacial solar cells may have a higher efficiency as light can enter from two directions and tandem solar cells may use a larger part of the incoming solar spectrum, increasing the efficiency. However, both these applications require transparent and conducting contacts. This thesis aimed to investigate how suitable the transparent conductive oxides aluminum doped zinc oxide (AZO) and indium doped tin oxide (ITO) are as contacts in bifacial CIGS cells or CIGS/Silicon tandem cells. The contacts must remain stable when CIGS is deposited on top of it, meaning that they have to endure first 500°C and then 600°C in combination with copper, indium, gallium and selenium vapours. A thin layer of AZO topped with ITO and pure ITO films of different thicknesses were deposited by RF- and DC-sputtering, varying the oxygen flow. Opto-electrical characterization showed that the transparency in the infrared was balanced against high conductivity due to a shift in the plasmon peak's position. No great difference was seen between pure ITO samples and AZO/ITO samples, so only the first where further processed. The ITO films were annealed to 500°C in the CIGS deposition chamber, exposed to selenium vapour. The films' sheet resistances dropped drastically, which was mainly attributed to activation of tin donors. ITO produced with low oxygen flows also appeared more crystalline according to x-ray diffraction measurements. Photon absorption in the ITO was used to estimate the current loss in bifacial and tandem applications and graphs with current loss and sheet resistance can be used to select an ITO deposition process. Commercial ITO was exposed to 100s of the CIGS deposition process but only during selenium and gallium vapour. A layer of gallium selenide could be identified on the surface, but the ITO appeared to remain stable. Sodium fluoride pre deposition treatment lowered the samples absorption for all wavelengths compared to non-treated samples.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-472196
Date January 2022
CreatorsKiselman, Klara
PublisherUppsala universitet, Solcellsteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationUPTEC F, 1401-5757 ; 22011

Page generated in 0.0022 seconds