Current karst hazard maps in Kentucky reflect the general lithology of the state and ignore or significantly reduce the impact of the actual sinkholes present within these areas. These maps rely on equal weighting, by area, of the Karst Potential Index (KPI) map and the sinkhole inventory map. The KPI is based on a 1:500,000 geologic map and less than 500 data points of carbonate rocks. The sinkhole inventory is derived from topographic maps updated in the 1970s with approximately 10-foot resolution. This method gives a preferential weighting of the KPI over the sinkhole data. Consequently, the current method is broad in scope and ineffective in hazard assessment. There is a need for a reliable karst hazard map for land use planners, government emergency planning agencies, and other stakeholders. In this study, more detailed geology information and LiDAR (Light Detection and Ranging) data are applied to three counties (Bullitt, Logan, and Woodford) to generate a more accurate assessment of karst hazard. An assessment method based on sinkhole density is also tested. By refining the hazard score to more precise areas of concern, future stakeholders will find this data useful in emergency planning and land assessment.
| Identifer | oai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:ees_etds-1075 |
| Date | 01 January 2019 |
| Creators | Pierskalla, William P., Jr. |
| Publisher | UKnowledge |
| Source Sets | University of Kentucky |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations--Earth and Environmental Sciences |
Page generated in 0.0018 seconds