In this work four fiber-reinforced polymers and one polymer were tested with four different mechanical testing methods, namely; vickers harness test, scratch test, fatigue test and tensile stress. The testing methods were evaluated according to their applicability on the materials mentioned. The purpose of the work is to give the reader an insight of what mechanical properties of materials mean and what kinds of properties one can expect from fiber-reinforced polymers. The purpose is also to give the reader a good sense of what can be expected from the methods tested on fiber-reinforced polymers. Vickers harness test was found to be a valid method as long as the surface of the material was neither uneven nor processed. Scratch test was found to be an overall good method but was recommended to be used in combination with scanning electron microscope, or other imaging tool for strong magnification. Processing of surfaces proved to affect the results. Tensile test was proved to give the user a good perception of the properties of the material, as long as the material not was woven. Woven materials found to differ a lot from each other. One conclusion from this result is that woven materials are best to be tested several times. Fatigue test was found to require more preparatory time and calculations to be able to give the user any useful results, the loads used in the project was found to be too light weight. Processed surfaces were found to be hard to examine in a scanning electron microscope.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-356470 |
| Date | January 2018 |
| Creators | Löwe, Rakel |
| Publisher | Uppsala universitet, Institutionen för teknikvetenskaper |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | TVE-F ; 18008 |
Page generated in 0.0023 seconds