Return to search

Design of a Pivotally Tool Holder

Ljunghäll AB in Södra Vi has many industrial robots in their casting production. These robots have a tendency to wear out. The purpose with this thesis was to design a toolholder that was able flip to a 90 degree angle to get a more flexible production but also to lessen the wear on the robot. Parts of David G. Ullman and Ulf Liedholm’s design processes was used as a base for the solutions and the conceptual design. A number of concepts where made and one of them evaluated to be a refined concept. The result became a tool-holder that used an air-motor and two spur gears to rotate the plate where the tool is mounted to a 90 degree angle. According to the calculations that was made, both by hand and by the computer program COSMOS, the concept should work in practice. A prototype ought to be made to guarantee the function of the concept.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-12097
Date January 2008
CreatorsVoxberg, Joel, Persson, Johan
PublisherLinköpings universitet, Institutionen för ekonomisk och industriell utveckling, Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, Institutionen för ekonomisk och industriell utveckling
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0019 seconds