The IEEE 802.11 wireless local area network (WLAN) standard supports multiple transmission modes. However, the higher mandatory data rate mode does not necessarily yield higher throughput. This research started from the relationship between the link throughput and the channel's carrier-to-noise (C/N) ratio. Two algorithms are proposed, a throughput optimization and transmitter power saving (TOTPS) algorithm and an extended throughput optimization and transmitter power saving (ETOTPS) algorithm, based on the knowledge of the C/N ratio at the receiver. In particular, we take the approach of adjusting link parameters like transmitter power and transmission mode to achieve the maximum throughput at different C/N values. Since the TOTPS algorithm tends to reduce the transmitter power without degrading the link throughput, transmitter power can be saved. This not only prolongs battery life, which is critical in ad hoc wireless networks, but also reduces the potential interference to neighboring wireless network systems. The ETOTPS algorithm, on the other hand, aims for higher throughput by trading in more transmitter power. This is particularly desired for high-speed data transfer in an emergency situation. Both algorithms are developed to be applied to IEEE 802.11b, IEEE 802.11a and IEEE 802.11g links. / Ph. D.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/28343 |
Date | 30 October 2006 |
Creators | Mo, Tianmin |
Contributors | Electrical and Computer Engineering, Bostian, Charles |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Dissertation |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | disst_aft_defense_09_06_2006_CWB_mo.pdf |
Page generated in 0.0023 seconds