In this thesis, we will try to grow m-plane InGaN blue light-emitting diodes (LEDs) and discuss the characteristics. First, pure m-plane GaN on the m-sapphire grown by plasma assisted molecular beam epitaxy (PAMBE) had been achieved. ¢½/¢» ratio and the growth temperature are the most important factors in the growth sequence. M-GaN film with better crystal quality was grown successfully by tuning these two factors.
Indium composition in the InGaN layer is an important issue in the growth of blue LEDs; In/Ga ratio could affect the bandgap i.e. the target wavelength of a LED. We have to regard the crystal quality and the target wavelength of the InGaN layer in growth procedure.
Structural properties were investigated by X-ray diffraction (XRD). XRD measurements showed that the crystal orientation of GaN films was pure m-plane. From cathodoluminescence (CL) spectra, the luminescence wavelength of InGaN layer is in the blue-light range.
The crysatalline of m-plane InGaN blue LEDs were analyzed by XRD and Electron Back-Scattered Diffraction (EBSD). Electroluminescence (EL) was measured under the different inject current conditions; the polarization of EL was also measured. Moreover, the current-voltage curve and current-output curve were carried out.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0822110-021933 |
Date | 22 August 2010 |
Creators | Liang, Ting-wei |
Contributors | Yung-Sung Chen, Min-Hsiung Tsai, Der-Jun Jang, Li-Wei Tu |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0822110-021933 |
Rights | not_available, Copyright information available at source archive |
Page generated in 0.0019 seconds