Probabilistic assessment and life cycle management of engineering components and systems in a nuclear power plant is intended to ensure safe and efficient operation of energy generation over its entire life. The CANDU reactor core consists of 380-480 pressure tubes, which are like miniature pressure vessels that contain natural uranium fuel. Pressure tubes operate under severe temperature and radiation conditions, which result in degradation with ageing. Presence of flaws in a pressure tube makes it
vulnerable to delayed hydride cracking (DHC), which may lead to rupture or break-before-leak situation. Therefore, assessment of flaws in the pressure tubes is considered an integral part of a reactor core assessment program. The main objective of the thesis is to develop advanced probabilistic and mechanical stress field models for the assessment of flaws.
The flaw assessment models used by the industries are based on deterministic upper/lower bound values for the variables and they ignore uncertainties associated with system parameters. In this thesis, explicit limit state equations are formulated and first order reliability method is employed for reliability computation, which is more efficient than simulation-based methods. A
semi-probabilistic approach is adopted to develop an assessment model, which consists of a mechanics-based condition (or equation)
involving partial factors that are calibrated to a specified reliability level. This approach is applied to develop models for DHC initiation and leak-before-break assessments. A novel feature of the proposed method is that it bridges the gap between a simple deterministic analysis and complex simulations, and it is amenable to practical applications.
The nuclear power plant systems are not easily accessible for inspection and data collection due to exposure to high radiation.
For this reason, small samples of pressure tubes are inspected at periodic intervals and small sample of data so collected are used as input to probabilistic analysis. The pressure tube flaw assessment is therefore confounded by large sampling uncertainties. Therefore, determination of adequate sample size is an important issue. In this thesis, a risk informed approach is proposed to define sample size requirement for flaw assessment.
Notch-tip stress field is a key factor in any flaw assessment model. Traditionally, linear elastic fracture mechanics (LEFM) and its extension, serves the basis for determination of notch-tip stress field for elastic and elastic-perfectly-plastic material, respectively. However, the LEFM solution is based on small deformation theory and fixed crack geometry, which leads to singular stress and strain field at the crack-tip. The thesis presents new
models for notch and crack induced stress fields based on the deformed geometry. In contrast with the classical solution based on
small deformation theory, the proposed model uses the Cauchy's stress definition and boundary conditions which are coupled with the deformed geometry. This formulation also incorporates the rotation near the crack-tip, which leads to blunting and displacement of the crack-tip. The solution obtained based on the final deformed
configuration yields a non-singular stress field at the crack-tip and a non-linear variation of stress concentration factor for both elastic and elastic-perfectly-plastic material.
The proposed stress field formulation approach is applied to formulate an analytical model for estimating the threshold stress intensity factor (KIH) for DHC initiation. The analytical approach provides a relationship between KIH and temperature that is consistent with experimental results.
| Identifer | oai:union.ndltd.org:WATERLOO/oai:uwspace.uwaterloo.ca:10012/4329 |
| Date | January 2009 |
| Creators | Sahoo, Anup Kumar |
| Source Sets | University of Waterloo Electronic Theses Repository |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
Page generated in 0.0026 seconds