<p>Certification of energy wheel effectiveness by a selected international laboratory for many types and sizes of wheel produced by each manufacturer has proven to be very expensive and has been prone to large uncertainties. This research uses a new, low-cost, transient method to predict the effectiveness using only data obtained from transient measurements.</p><p>In this thesis, an analytical model is presented for predicting the effectiveness of rotating energy wheels using only the characteristics measured on the same non-rotating wheels exposed to a step change in temperature and humidity. A relationship between the step response and the periodic response of an energy wheel is developed using first order linear system design theory. This allows the effectiveness of an energy wheel to be predicted when the characteristics of a step response are known. The effectiveness correlations and uncertainty bounds for sensible and latent effectiveness of energy wheels determined from transient measurements are thus presented.</p><p>The experimental transient testing method and experimental verification of the effectiveness model for several different wheels are also presented in this thesis. The results obtained from the new effectiveness model are shown to agree, within uncertainty bounds, with the results obtained from the standard steady state experimental testing method and numerical simulations.</p>
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-06222005-121700 |
| Date | 22 June 2005 |
| Creators | Abe, Oyetope Omobayode |
| Contributors | Tekaya, Prof., Simonson, Carey J., Dolovich, Allan T., Bugg, James D., Besant, Robert W. |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-06222005-121700/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0019 seconds