Advancements in the networking and routing industry have created higher power electronic systems which dissipate large amounts of heat while cooling technology for these electronic systems has remained relatively unchanged. This report illustrates the development and testing of a hybrid liquid-air cooling system prototype implemented on Cisco’s 7609s router. Water was the working fluid through cold plates removing heat from line card components. The water was cooled by a compact liquid-air heat exchanger and circulated by two pumps. The testing results show that junction temperatures were maintained well below the 105°C limit for ambient conditions around 30°C at sea level. The estimated junction temperatures for Cisco’s standard ambient conditions of 50°C at 6,000 feet and 40°C at 10,000 feet were 104°C and 96°C respectively. Adjustments to the test data for Cisco’s two standard ambient conditions with expected device characteristics suggested the hybrid liquid-air cooling design could meet the projected heat load.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-1199 |
| Date | 01 November 2009 |
| Creators | Glover, Garrett A |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses and Project Reports |
Page generated in 0.0022 seconds