Lithium-sulfur (Li-S) batteries are faced with practical drawbacks of poor cycle life and low charge efficiency which hinder their advancements. Those drawbacks are primarily caused by the intrinsic issues of the cathodes (sulfur) and the anodes (Li metal). In attempt to resolve the issues found on the cathodes, this work discusses the method to prepare a binder-free three-dimensional carbon nanotubes-sulfur (3D CNTs-S) composite cathode by a facile and a scalable approach. Here, the 3D structure of CNTs serves as a conducting network to accommodate high loading amounts of active sulfur material. The efficient electron pathway and the short Li ions (Li+) diffusion length provided by the 3D CNTs offset the insulating properties of sulfur. As a result, high areal and specific capacities of 8.8 mAh cm−2 and 1068 mAh g−1, respectively, with the sulfur loading of 8.33 mg cm−2 are demonstrated; furthermore, the cells operated at a current density of 1.4 mA cm−2 (0.1 C) for up to 150 cycles. To address the issues existing on the anode part of Li-S batteries, this work also covers the novel approach to protect a Li metal anode with a thin layer of two-dimensional molybdenum disulfide (MoS2). With the protective layer of MoS2 preventing the growth of Li dendrites, stable Li electrodeposition is realized at the current density of 10 mA cm−2; also, the MoS2 protected anode demonstrates over 300% longer cycle life than the unprotected counterpart. Moreover, the MoS2 layer prevents polysulfides from corroding the anode while facilitating a reversible utilization of active materials without decomposing the electrolyte. Therefore, the MoS2 protected anode enables a stable cycle life of over 500 cycles at 0.5 C with the high sulfur loading amount of ~7 mg cm−2 (~67 wt% S content in cathode) under the low electrolyte/sulfur (E/S) ratio of 6 μL mg−1. This translates to the specific energy and power densities of ~550 Wh kg-1 and ~300 W kg−1, respectively. Additionally, such values far exceed the electrochemical performance of the current Li-ion batteries. Therefore, the synergetic effect of utilizing the 3D CNT-S cathode and the MoS2 protected Li anode will allow the Li-S batteries to become applicable for the transportation and the large-scale energy grid applications.
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc1538758 |
| Date | 08 1900 |
| Creators | Cha, Eunho |
| Contributors | Choi, Wonbong, Du, Jincheng, Aouadi, Samir, Shi, Sheldon, Reid, Russell |
| Publisher | University of North Texas |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | xv, 176 pages, Text |
| Rights | Use restricted to UNT Community, Cha, Eunho, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved. |
Page generated in 0.0021 seconds