Robot manipulators are commonly used in today's industrial applications. In this report a 3D-printed anthropomorphic robot arm with three degrees of freedom was constructed. The robot arm operates with the use of a microcontroller and servomotors. Through utilizing the Denavit-Hartenberg method and inverse kinematics the robot’s end effector is able to reach a specified point in space. This report has found that the accuracy of the constructed robotic manipulator reaching a specific coordinate depends on the distance of the end effector from its base. The relative error of the constructed robot’s positioning falls within 1.3- 6.9%, with a 99% confidence. / Robotmanipulatorer är idag vanligt förekommande i industriella applikationer. I denna rapport konstrueras en 3D-printad antropomorf robotarm med tre frihetsgrader. Robotarmen styrs med hjälp av en mikrokontroller och servomotorer. Baserat på DenavitHartenberg metoden och inverskinematik kan robotens ändpunkt ta sig till en specificerad punkt i rummet. Vidare har rapporten funnit att den konstruerade robotens exakthet beror på avståndet emellan robotens manipulator och dess bas. Det relativa felet av robotens positionering ligger inom intervallet 1.3-6.9% med en 99% konfidens.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-279804 |
| Date | January 2020 |
| Creators | WALLÉN KIESSLING, ALEXANDER, MÄÄTTÄ, NICLAS |
| Publisher | KTH, Skolan för industriell teknik och management (ITM) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf, video/mp4 |
| Rights | info:eu-repo/semantics/openAccess, info:eu-repo/semantics/openAccess |
| Relation | TRITA-ITM-EX ; 2020:26 |
Page generated in 0.0076 seconds