The mechanical properties of biomaterials play important roles in performing their specialized functions: synthesizing, storing, and transporting biomolecules; maintaining internal structures; and responding to external environments. Besides biological cells, there are also many other biomaterials that are highly deformable and have a diameter between 1μm and 100μm, comparable to that of most biological cells. For example, many polymeric microcapsules for drug delivery use are spherical particles of micrometers size. In order to mechanically characterize individual micrometer-sized biomaterials, the capability of capturing high-resolution and low-magnitude force feedback is required.
This research focuses on the development of micro devices and experimental techniques for quantifying the mechanical properties of alginate-chitosan microcapsules. The micro devices include microelectromechanical systems (MEMS) capacitive force sensors and force-feedback microgrippers, capable of measuring sub-μN forces. Employing the MEMS devices, systems were constructed to perform the micro-scale compression testing of microcapsules.
The force sensors are capable of resolving forces up to 110μN with a resolution of 33.2nN along two independent axes. The force sensors were applied to characterizing the mechanical properties of hydrogel microparticles without assembling additional end-effectors. The microcapsules were immobilized by a PDMS holding device and compressed between the sensor probe and holding device. Young's modulus values of individual microcapsules with 1%, 2%, and 3% chitosan coating were determined through the micro-scale compression testing in both distilled deionized (DDI) water and pH 7.4 phosphate buffered saline (PBS). The Young's modulus values were also correlated to protein release rates.
Instead of compressing the microcapsule against the wall of the holding device, a force-feedback MEMS microgripper with the capability of directly compressing the microcapsule between two gripping arms has been used for characterizing both the elastic and viscoelastic properties of the microcapsules during micromanipulation. The single-chip microgripper integrates an electrothermal microactuator and two capacitive force sensors, one for contact detection (force resolution: 38.5nN) and the other for gripping force measurements (force resolution: 19.9nN). Through nanoNewton force measurements, closed-loop force control, and visual tracking, the system quantified the Young's modulus values and viscoelastic parameters of alginate microcapsules, demonstrating an easy-to-operate, accurate compression testing technique for characterizing soft, micrometer-sized biomaterials.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/17783 |
| Date | 24 September 2009 |
| Creators | Kim, Keekyoung |
| Contributors | Sun, Yu |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds