Return to search

Obten??o de comp?sitos cer?micos refor?ados com carbetos refrat?rios a partir de precursores polim?ricos

Made available in DSpace on 2014-12-17T14:58:10Z (GMT). No. of bitstreams: 1
YgorAAF.pdf: 1834910 bytes, checksum: ddd6f585ec4f1145f34bbec8197b2e39 (MD5)
Previous issue date: 2006-05-19 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / In this work, were produced ceramic matrix composites based in SiCxOy e Al2O3 reinforced with NbC, by hydrosilylation reaction between D4Vi and poly(methylhydrosiloxane) mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. After the mixture and compactation at 80?C (warm pressing), the samples were pyrolised at 1200 and 1400?C and infiltred with ICZ and LZSA respectively, and thermically, physical and structurally characterized by X-ray diffraction, density and porosity, flexural mechanical strength and fracture surface by scanning electron microscopy. The yield ceramic obtained after pyrolysis for studied composition at 1200?C was 95%. The obtained phases had been identified as being Al3Nb, NbSi2 and NbC. The composite material presented apparent porosity varying of 15 up to 32% and mechanical flexural strenght of 32 up to 37,5MPa. After the fracture surface analysis, were observed a phases homogeneous dispersion, with some domains of amorphous and crystalline aspect. The samples that were submitted the infiltration cycle presented a layer next the surface with reduced pores number in relation to the total volume / Neste trabalho foram produzidos comp?sitos de matriz cer?mica baseados em SiCxOy e Al2O3 refor?ados com NbC, a partir da rea??o de hidrossila??o entre os olig?meros D4Vi (1,3,5,7 tetrametil 1,3,5,7 tetravinilciclotetrasiloxano) e D1107 - Poli(metilhidrogeniosiloxano), misturados com Al2O3 como carga inerte, Nb e Al como aditivos reativos. Ap?s a mistura e compacta??o em 80 ?C (warm pressing), as amostras foram pirolisadas ? 1200 e 1400?C e infiltradas com ICZ e LZSA respectivamente, e caracterizadas t?rmica, f?sica e estruturalmente atrav?s de an?lises t?rmicas (TG e DTA), identifica??o de fases cristalinas por difratometria de raios-x, densidade e porosidade, resist?ncia mec?nica ? flex?o e superf?cie de fratura por microscopia eletr?nica de varredura. O Rendimento cer?mico obtido para a composi??o estudada ? 1200?C foi de 95%. As fases formadas ap?s a pir?lise foram identificadas como sendo Al3Nb, NbSi2 e NbC os comp?sitos apresentaram porosidade aparente variando de 15 a 32 por cento e resist?ncia mec?nica a flex?o, de 32 a 37,5MPa. Ap?s a an?lise da superf?cie de fratura observou-se uma dispers?o homog?nea de fases, com algumas regi?es de aspecto amorfo e cristalino. As amostras que foram submetidas a ciclo de infiltra??o apresentaram uma camada pr?xima a superf?cie com reduzido n?mero de poros em rela??o ao volume total

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/15658
Date19 May 2006
CreatorsFonseca, Ygor Alexandre de Aquino
ContributorsCPF:50580396720, http://lattes.cnpq.br/5460040602567184, Paskocimas, Carlos Alberto, CPF:06296687877, http://lattes.cnpq.br/2365059843175411, Costa, Francin? Alves da, CPF:45327220478, http://lattes.cnpq.br/8698567925323942, Acchar, Wilson
PublisherUniversidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Engenharia Mec?nica, UFRN, BR, Tecnologia de Materiais; Projetos Mec?nicos; Termoci?ncias
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0019 seconds